Read the ground before you draw on it.
Bring a LiDAR survey and the Studio reads slopes, water paths, trees and earthworks on your own computer. No survey yet? Start from public elevation and satellite heat, always labelled as public data.
Know where the water goes before the first road.
What the scan tells you.
Slope decides roads, drainage and cut and fill. Water paths decide where plots flood. Trees decide what you can keep. The scan puts all three on the parcel before you spend on drawings.
Slopes and water paths
See where the ground falls, where water will run and where it will pond, drawn over your parcel.
- Slope bands by percentage
- Flow paths and low points
- Editable storm and runoff assumptions
Trees and earthworks
Find trees worth keeping and estimate cut and fill for the layout you draw.
- Tree points from the survey
- Bulking factor you can change
- Earthwork rates start at zero so you enter your own
Satellite heat
Add Landsat surface heat, or a drone's single-band GeoTIFF, to see which parts of the site run hot.
- Public Landsat data, no key needed
- Your own GeoTIFF if you have one
- Shown beside the design for shade and open space
Check the design against the ground
Roads, plots and towers you draw are checked against the scan so a drain or a steep slope does not surprise you later.
- Same map as Land intel and the layout tools
- Flag low ground under plots
- Present the result to a partner
Three clear steps.
- Drop in your survey fileLAS, LAZ or XYZ. It is read in a background worker on your computer.
- Read the slopes, water and earthworksChange the assumptions to match your site, then compare options.
- Design on the same parcelConcepts, roads, plots and towers are checked against what the scan found.
Public data is never LiDAR.
- ✓Public elevation is about 30 m. Without a survey, the Studio shows public elevation and says so on screen.
- ✓We do not fly scans. Bring a survey from a licensed surveyor or drone operator.
- ✓Your numbers. Bulking, storm and runoff values are editable, and earthwork rates start at zero.
- ✓Nothing is uploaded. Survey files are read on your device.
Straight answers.
Can the Site scan read my LiDAR file?
It reads LAS, LAZ and XYZ point files in a background worker in your browser. Very large files take longer, and nothing is uploaded to DesiAcres.
Do you provide the LiDAR survey?
No. We do not fly scans. Use a licensed surveyor or drone operator, or start from public elevation and satellite heat, which the Studio labels as public data.
What can I do without a survey?
Use the Studio's public elevation at about 30 m and Landsat heat to get a rough picture, then replace it with a survey when you have one.
Is the earthwork estimate reliable?
It is as good as the survey and the rates you enter. Rates start at zero on purpose so that no number is presented as a quote.
How does the scan connect to layout design?
The scan sits on the same parcel as the concepts, roads, plots and towers, so the design is checked against slope and water as you draw.
Tell us about your land.
A named DesiAcres advisor will call you, agree the scope in writing and take it from there.
DesiAcres Advisory Group provides advisory and technology services. Nothing on this page is a legal opinion, a valuation, a structural design or an approved plan. Confirm legal points with a licensed advocate and approvals with the authority. RERA: ACK/KA/RERA/1251/309/AG/250425/006139.